How to Use the Crysalli ProFusion Tapping Kit

By Coffee Machine Depot | Published: 2026-10-28

Category: How-to Guides

Learn step-by-step how to set up and use the Crysalli ProFusion Beverage Dispensing Tapping Kit for clean, secure cold brew on tap.

Quick Answer

Use the Crysalli ProFusion Beverage Dispensing Tapping Kit to connect your cold brew keg to a commercial draft faucet with clean, secure fittings and proper pressure control.

Why a Complete Tapping Kit Matters

A complete tapping kit saves you the headache of mismatched parts. The Crysalli ProFusion kit includes all fittings, lines, and connectors needed for a full draft installation, so you don't have to source each component separately.

This is both a menu upgrade and a workflow upgrade. With the right hardware, you can turn a batch of cold brew into a consistent, high-volume menu item without leaks or pressure problems.

Pressure and Cleanliness: The Two Things That Make or Break Draft Coffee

Draft coffee needs steady, moderate pressure to pour cleanly without excessive foam or flat pours. The kit's connectors are designed to maintain that pressure from keg to faucet.

Cleanliness is equally critical. Any residue in the lines can spoil the flavor of your next batch. Plan to flush the system between kegs and follow a regular cleaning routine.

Step-by-Step Setup and Use

Inspect and organize components: Lay out all fittings, lines, and connectors from the kit. Verify you have all pieces before starting. Check that the faucet and keg coupler are compatible with your draft system. Missing parts cause delays; do a dry run before connecting anything.
Connect the keg coupler to the cold brew keg: Attach the keg coupler to the keg's valve, ensuring it locks securely. Open the coupler slowly to pressurize the keg. Listen for leaks and tighten if needed. A loose coupler causes gas leaks and flat pours.
Run the beverage line from keg to faucet: Use the supplied line to connect the coupler's outlet to the faucet's shank. Keep the line as straight as possible and avoid kinks. Secure connections with the provided clamps. Kinked lines restrict flow and cause foaming.
Set the pressure: Adjust the regulator to the recommended pressure for cold brew (typically 10-15 psi). Start low and increase until the pour is smooth with a slight cascading effect. Too much pressure causes excessive foam; too little gives a flat pour.
Flush the line before serving: Run a small amount of cold brew through the faucet to clear any cleaning solution or stagnant liquid from the line. Discard that first pour. Flushing prevents off-flavors in the first cup.
Clean the system after each keg: Disconnect the coupler, remove the faucet, and run a cleaning solution through the line. Rinse thoroughly with water before connecting a new keg. Regular cleaning prevents mold and flavor contamination.

Product Facts

Crysalli ProFusion Beverage Dispensing Tapping Kit (Complete Set-Up): Complete tap hardware: all fittings, lines, and connectors for a complete draft installation. You get everything needed to go from cold brew keg to faucet in one kit, reducing compatibility issues and setup time.
Crysalli ProFusion Beverage Dispensing Tapping Kit (Complete Set-Up)